I'd like to rotate a Par64 from your database in any direction including the fork.
Is it possible to lock it to the fixture?

You have 3 angles for rotation: 1 for fork and 2 for the fixture, what is the problem?

I want to create a six bar, facing from back to front , vertical in an angle of 45 degrees.
The fork stays upright and i want it to look like as perfect as it is in my real shows and that fork is bothering me.
The lower one sticks his fork in the upper one , pffft.
Shure I can get everywhere with the fixture but not with the fork.
Otherwise send me files for Par 64 narrow and mfl and I build my own fork and copy and paste that in my vieuw.

Greetings

Oke, first did not know how to do it but i found a way.
Went to "my computer" , copied the model, took away the fork and went back to the program.
Selected an open line and searhed for the new model, et voila.
Later on i put a fork to it in the room mode if it is necessary for the detail.
I know it goes about nothing, but....

See Ya

Wow, I'm impressed!

We will add one more angle for conventional soon.