Could I/we get a fixture created of the AF-1000 and the old style dataflash? Both are made by High End Systems.

Thanx.

Hello muvment,

We can create for you drivers for both Dataflashes, but we can not find DMX mapping for them. If you have DMX mapping for those fixtures just send it to us and we will make it easily. Although we need photometrical data.

DMX:
Intensity byte from DMX – Values from 0-255 are scaled by fixtures into 64 intensities

Duration byte from DMX – Values from 0-255 are scaled by the fixture into 64 durations. Value 0 will flash the lamp for approx. 4 milliseconds. 255 will flash it for a little more than 0.5 second.

Rate byte from DMX – Values from 0-255 are scaled by the fixture into 64 rates. The lowers rate is one shot move that requires a change in intensity or duration to flash again. The highest rate will appear as “latch on” – flash at 120 flashes/sec on 60-Hz line and 100 flashes/sec on a 50-Hz line.

There is no photmetric data from the company, but the color temperature is 8000 degrees.

More info is available at http://www.highend.com/pub/products/eff ... af1000.pdf

The angle fo the reflector appears to be about 60 degrees.

Unfortunatly we did not find enough information for creation drivers for yours fixture.
Value from 0 till 255 is good information, but we need to know concrete number of channels and value on each channel.
Due to the photometric we need to know although the number of luxes, lumens or candelas.