Specifications:
Brand: U`King
Model: ZQ-B337 - Moving Head
Power:200W
Pan: 540°
Tilt: 270°
Beam: 13° beam angle
Lumen: 81210 LUX@1m 20000 LUX@2m 8484 LUX@3m
Voltage: AC100-240V,50-60Hz
Light source: LED lamp bead 90W
Pattern 1: 7 pattern white light
Pattern 2: 6 rotating pattern white light
Prism: 3 prism
Control mode: sound control, master-slave, self-walking,DMX
Channels: 14CH

I've attach the manual, an image of the unit, an image of the unit with dimensions and a video of the unit showing in selection order the color wheel, gobo1 and gobo2. Also showed shake, gobo rotation, prism and roration, plus strobes from slow to fast. Didn't show the scrolling of gobos or color wheel.

Video also available here, as not sure attaching a video has worked: https://wetransfer.com/downloads/f0bbc3 ... 510/4d297b

Ready!

Thanks you very much for completing this profile.

Noticed a few problems.

Color Wheel
The Color Wheel values don't match-up to the manual, for instance Red should be from 16-23, but in the L8 profile it's only from 16-17. Yellow should be at 64-71, but is at 63-65, etc..

Gobos
Gobo 1 on chanel 7 should be open plus 7 gobos from 0-79, then the same gobos with shake from 80-127.

Gobo 1 only has 3 gobos in the L8 fixture and no shake. The scrolling looks correct, but only scrolls through 3 gobos, glitches and starts the 3 same 3 gobos again.

Gobo 2 on channel 8 should be open plus 6 gobos from 0-69, then the 6 gobos with shake from 70-127.

Gobo 2 only has 2 gobos in slots 5 & 6, and shake doesn't function.

Focus
Focus doesn't seem to do anything, tried from console and L8 controller.

Thanks

Thanks very much for working on this.

With the last update gobos 1 & 2 are correct.

Colors are just missing White/Red split, all other colors are good.

Zoom/Focus is working.

Only other thing is with prism added the beam size/angle remains the same, where as in reality the beam size/angle increases with prism in place.

Could you please take a look at color wheel as white/red split is missing.

Also beam size with prism should be larger than beam size without prism.

Thanks